June 24, 2018
Well the draws are done and the draws pulls have worked out find.
The top has been put together but needs sanding and fixing into position.
The side draw which holds the Lathe Chisels has the holders.
Luckily the longest chisel still fits with a small clearance at top and...
June 18, 2018
The Lathe has been siting on a temporary Bench for years. Rubbish has accumulated under and around it.
Time for a proper Table with storage draws and a place to safely store the tuning tools and chisels.
First to get the area cleaned up which will be a task in it...
June 13, 2018
Well it is time to make the last cabinet in the series. Somewhere to put my Spray cans and small paint tins.
I wanted a shallow cabinet for the cans but tall enough for what i need.
It also needed to match in with the other cabinets.
I had the idea before doing the batte...
June 12, 2018
With the main cabinet on the wall it was time to sort out the Battery Drills and chargers.
I also had in mind a cabinet for my Spray Paint and small tins of paint.
So I had to design a cabinet that would integrate both the main cabinet and the thinner spray paint cabinet...
My Garage was getting very messy and it was time to start cleaning and upgrading it.
The back wall was first. I had to remove the old shelves and sort out what was staying and what was being thrown out.
I made the shelving many year back as a temporary location to put m...
I'm busy working on my blog posts. Watch this space!
August 20, 2019
Glass Coffee Table
May 11, 2019
Garage / Workshop Upgrade - Part 2
November 20, 2018
Garage / Workshop Upgrade - Part 1
October 11, 2018
Garden Wall Cabinet
July 16, 2018
Mallet in Gidgee
July 12, 2018
New Lathe Table. Final
New Lathe Table. Part 1
Garage Back Wall Upgrade. Final Part
Garage Back Wall Upgrade. Part 2
August 2019 (1)
May 2019 (1)
November 2018 (1)
October 2018 (1)
July 2018 (2)
June 2018 (5)
Wells Wood Working